Large Scale FDM Creatbot Dual Head DE Plus 3d Printer 400x300x520mm


Large Scale FDM Creatbot Dual Head DE Plus 3d Printer 400x300x520mm


  • Dual Extruder Creatbot DE Plus 3D Printer
  • Print size 400x300x520mm
  • 4.3 inch color touch screen
  • Max. 350°C print temperature hotend
  • Heat bed platform max. 100°C
  • Filament checking when material runs out
  • Resume print after unexpected power failure
SKU: DE Plus Category: Tags: , , ,


Creatbot DE Plus 3d Printer Machine 400x300x520mm is a reliable and affordable big print size 3d printer.

Temperature Up To 350°C

Creatbot is the first one to publish 350°C ultra-high temperature nozzle to the mass market. And it possesses exclusive patent. This kind of nozzle allows printing with a variety of filaments. And the fantasy blue metal cooling sink can efficiently cool down the heatbreak. The nozzle height can also be micro adjusted. And we accept customized for single/double/triple head.

Creatbot DE 3d printer machine

High Precision

We exclusively research and develop the extruder feeding system support high-speed printing, and accuracy can reach high to 0.05mm, it allows to extrude filament steady without block.

Precision up to: 0.05 mm Speed up to: 200 mm/s

high print temperature dx 3d printer

Large Build Size of Creatbot DE Plus 3d printer

We provide a variety of printing sizes for your reference. The largest build volume is 5 to 20 times bigger than it of other ordinary 3D printers in nowadays market.

CreatBot DE Plus build volume: 400*300*520 mm

Creatbot DE Plus 3d printer 400*300*520mm

Outage Restored & Filament Detection

The Creatbot DE Plus 3d printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after the power’s on.

The printer will avoid invalid printing by stoping print and warning when filament runs out.

Resume Print Creatbot F430 3d printer

Borosilicate Glass Platform on Creatbot DE Plus 3d printer

The printer equipped with a borosilicate glass platform so that it can support hight thermal efficiency, you can turn off the hot bed automatically after a specified number of layers by setting parameters.

heat bed Creatbot DX 3d printer

Easy Touch Screen

The printer has a 4.3″ touch screen, easier to operate. There is an all-English-menu touch screen on the Creatbot DE Plus 3d printer, which is quite easy to operate and friendly use. One key to preheat, one key to print as well as many other shortcut keys.

Touch screen Creatbot F430 3d printer

More Features of Creatbot DE Plus 3d printer

  • Simple Feeding Frame: The stepper is separated with the hotend, so that the hotend is even lighter, smaller, and will have less inertia of movement, also greater space utilization.
  • Filament Feeder: Geared motor can reduce speed intelligently and it supports super torque so that it can feed filament in high precision without slipping and delay when withdrawing the filament.
  • Triple Extruders: support three-color printing, support printing sort of material.

Creatbot DE large size 3d printer

Technical Specs of Creatbot DE Plus 3d printer


  • Print Technology: Fused Deposition Modeling (FDM)
  • Build Volume: 400*300*520 mm/ * 3 nozzles build width:380mm
  • Number of Nozzles: Double (Max.3)
  • Resolution: 0.05 mm
  • Layer Resolution: 0.05 mm
  • Filament Diameter: 3.0 mm (1.75 mm optional)
  • Filament Compatibility: PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PTEG, HIPS, PP, Flexible, TPU, PVA, etc.
  • Nozzle Diameter: 0.4 mm(0.3 0.5 0.6 0.8 1.0 mm)
  • Print File Type: STL, OBJ, AMF, Gcode


  • Best Printing speed: 45 mm/s
  • Max. Printing speed: 200 mm/s

Electrical of DE Plus 3d printer

  • Power Requirements: 100V-110V or 200V-240V / 50-60Hz
    (Depending on your country’s default voltage)
  • Max. Power: 360 W
  • Screen: 4.3” full-color touch screen, multi-language
  • Control Chip: ATmega 2560
  • Storage Media: U Disk
  • Connectivity: USB


  • Software Bundle: CreatWare, Simplify 3D, Cura, Slice 3r, etc
  • Supported File Types: STL, OBJ, AMF
  • Operating Systems: Win7/8/10, macOS

The temperature of Creatbot DE Plus 3d printer

  • Ambient Operating Temperature: 15-32 °C
  • Max. Nozzle Temperature: 350 °C
  • Max. Bed Temperature: 100 °C

Special Function

  • Outage Restored: Save data when power is off
  • Filament Detection: Pause printing when filament run out
  • Automatic Shut-down: Turn off the power automatically when printing is complete


  • Construction: Power-Coated Steel, Aluminum Casting for Motion Components, POM etc
  • Build Plate: Glass Panel
  • Build Plate Leveling: Factory Leveled, Adjust Manually
  • Extruder: Geared motor (1:10 rate)
  • Stepper Motors:1.8°Step Angle with 1/16 Micro-stepping
  • X Y Positioning Precision: 12.7 μm
  • Z Positioning Precision: 1.25 μm

Additional information

Weight 72 kg
Dimensions 73 × 57 × 90 cm
Thread Dia.

1.75mm, 3.0mm

Extruder Qty.

Single, Dual, Triple

1 review for Large Scale FDM Creatbot Dual Head DE Plus 3d Printer 400x300x520mm

  1. 5 out of 5

    Adam Gillmore

    We ordered DE Plus 3d printer with triple head from Creatbot, and they arranged DHL shipping to arrive quite fast. Extra fees paid to add bltouch auto leveling function, which is much helpful for printing. It’s working well in our 3d printing store so far.

Add a review

You've just added this product to the cart: